Home › Vehicle Interior › LIGHTING (INT) › BACK DOOR COURTESY SWITCH (for Sedan)

BACK DOOR COURTESY SWITCH (for Sedan) > INSPECTION



1. INSPECT LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY


    E129674E01
  1. Check the resistance of the back door courtesy switch.

    1. Using an ohmmeter, measure the resistance between the terminals when the latch is operated with a screwdriver.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      Unlocked
      Below 1 Ω
      1 - 2
      Locked
      10 kΩ or higher

      If the result is not as specified, replace the luggage compartment door lock assembly.