Home › Vehicle Exterior › WIPER / WASHER › WIPER SWITCH (for Sedan)

WIPER SWITCH (for Sedan) > INSTALLATION



1. INSTALL WIPER SWITCH


    E114460E01
  1. Engage the claw and install the windshield wiper switch.

  1. Connect the 2 connectors.



2. INSTALL STEERING COLUMN COVER


    C139094E01
  1. Engage the claw to install the steering column upper cover.



    C139093E01
  1. Engage the 2 claws to install the steering column lower cover.

  1. Install the 3 screws.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }