WIPER SWITCH (for Sedan) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE STEERING COLUMN COVER |
![]() |
Remove the 3 screws, disengage the 2 claws, release the tilt lever and remove the steering column lower cover.
![]() |
Disengage the claw and remove the steering column upper cover.
| 3. REMOVE WIPER SWITCH |
![]() |
Disconnect the 2 connectors.
Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the wiper switch.