Home › Engine / Hybrid System › 1NZ-FE COOLING › COOLING FAN MOTOR (for Hatchback)

COOLING FAN MOTOR (for Hatchback) > ON-VEHICLE INSPECTION



1. INSPECT COOLING FAN MOTOR


    A186191E06
  1. Check that the motor operates smoothly when battery voltage is applied to the cooling fan motor connector.

  1. Connect the 400 A probe of an ammeter to terminal 2(+) of the cooling fan motor.

  1. Measure the current while the motor is operating.

    Standard Current:
    Tester Connection
    Condition
    Specified Condition
    1 (-) - 2 (+)
    20°C (68°F)
    7.4 to 10.9 A

    Text in Illustration 
    *a
    Component without harness connected
    (Cooling Fan Motor)
    If the result is not as specified, replace the cooling fan motor.