Home › Vehicle Interior › INTERIOR PANELS / TRIM › LOWER INSTRUMENT PANEL (for Sedan)

LOWER INSTRUMENT PANEL (for Sedan) > REASSEMBLY



1. INSTALL INSTRUMENT PANEL NO. 1 SAFETY PAD


    B132362
  1. Apply butyl tape to install the instrument panel No. 1 safety pad onto the lower instrument panel (When installing a new one).



2. INSTALL INSTRUMENT PANEL NO. 2 SAFETY PAD


    B132361
  1. Apply butyl tape to install the instrument panel No. 2 safety pad onto the lower instrument panel (When installing a new one).



3. INSTALL INSTRUMENT CLUSTER FINISH PANEL SEAL


    B132393
  1. Engage the 5 claws and install the panel seal.



4. INSTALL LIGHT CONTROL RHEOSTAT


    B349111
  1. Engage the 2 claws and install the light control rheostat.



5. INSTALL OUTER MIRROR SWITCH ASSEMBLY


    B349110
  1. Engage the 2 claws and install the outer mirror switch.



6. INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY


    B349099
  1. Engage the claw and install the glove compartment door stopper.



7. INSTALL INSTRUMENT PANEL CUP HOLDER SUB-ASSEMBLY LH


    B132343
  1. Install the instrument panel cup holder with the 3 <A> screws.



8. INSTALL INSTRUMENT PANEL CUP HOLDER SUB-ASSEMBLY RH


    B132344
  1. Install the instrument panel cup holder with the 3 <A> screws.