IGNITION COIL AND SPARK PLUG (for Sedan) > INSTALLATION |
| 1. INSTALL SPARK PLUG |
Using a 14 mm spark plug wrench, install the 4 spark plugs.
| 2. INSTALL IGNITION COIL NO. 1 |
![]() |
Install the 4 ignition coils with the 4 bolts.
![]() |
| *1 | Body |
| *2 | Cap |
![]() |
Connect the 4 ignition coil connectors.
| 3. INSTALL CYLINDER HEAD COVER NO. 2 |
![]() |
Tighten the 2 A nuts, then the 2 B nuts.
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |