Home › Drivetrain ยท CLUTCH › CLUTCH RELEASE CYLINDER (for Hatchback)

CLUTCH RELEASE CYLINDER (for Hatchback) > REMOVAL



1. DRAIN BRAKE FLUID


2. DISCONNECT CLUTCH RELEASE CYLINDER TO FLEXIBLE HOSE TUBE


    C235145
  1. Using a union nut wrench (10 mm), disconnect the clutch release cylinder to flexible hose tube from the clutch release cylinder assembly.

    HINT:
    Use a container to collect the fluid.



3. REMOVE CLUTCH RELEASE CYLINDER ASSEMBLY


    C235146
  1. Remove the 2 bolts and the clutch release cylinder assembly.