NAME PLATE (for Sedan) > REMOVAL |
| 1. REMOVE FRONT BUMPER COVER |
| 2. REMOVE FRONT BUMPER EMBLEM |
![]() |
Disengage the 4 claws and remove the front bumper emblem.
| 3. REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE |
![]() |
Apply protective tape, as shown in the illustration.
| *a | Protective Tape |
Using an infrared light, heat the No. 2 luggage compartment door name plate.
![]() |
Using a gasket scraper with its tip wrapped in protective tape, gradually peel the adhesive surface and remove the No. 2 luggage compartment door name plate.
| *a | Protective Tape |
Remove the protective tape.
| 4. REMOVE SYMBOL EMBLEM |
![]() |
Apply protective tape, as shown in the illustration.
| *a | Protective Tape |
Using an infrared light, heat the symbol emblem.
![]() |
Using a gasket scraper with its tip wrapped in protective tape, gradually peel the adhesive surface and remove the symbol emblem.
| *a | Protective Tape |
| *b | Location Pin |
Remove the protective tape.