Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER (for Sedan)

FRONT BUMPER (for Sedan) > REMOVAL



1. REMOVE FRONT BUMPER COVER


    B209115E02
  1. Apply protective tape, as shown in the illustration.
    Text in Illustration 
    *a
    Protective Tape



    B209117
  1. Remove the 7 screws and the 3 bolts.

  1. Remove the 2 screw grommets.

  1. Remove the 6 clips.



    B209118
  1. Disengage the 6 claws and remove the front bumper cover.

  1. Disconnect the connectors.



    B209120
  1. Remove the 2 clips and the screw grommet.