Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT DOOR WINDOW FRAME MOULDING (for Hatchback Center)

FRONT DOOR WINDOW FRAME MOULDING (for Hatchback Center) > INSTALLATION



1. INSTALL FRONT DOOR WINDOW FRAME UPPER MOULDING
  1. Clean the attachment surface.

    1. Using an infrared light, heat the adhesive remaining on the body.

      Heating Temperature:
      Item
      Temperature
      Vehicle Body
      40 to 60°C (104 to 140°F)

      CAUTION:
      Do not burn yourself with the heated body or infrared light.

      NOTICE:
      Do not heat the vehicle body excessively.

    2. Using a piece of cloth, rub the remaining adhesive off the front door front lower frame.

    3. Using a non-residue solvent, clean the attachment surface.

  1. Remove the release paper from the front door window frame upper moulding.

  1. Engage the 3 guides and install a new front door window frame upper moulding.
    Text in Illustration 
    *1
    Double-sided tape

    NOTICE:
    Thoroughly press the front door window frame upper moulding to ensure that it adheres.