Home › Vehicle Interior › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY (for Hatchback RH Side)

REAR SEAT INNER BELT ASSEMBLY (for Hatchback RH Side) > REMOVAL



1. REMOVE REAR SEAT CUSHION COVER WITH PAD SUB-ASSEMBLY (for 60/40 Split Seat Type)


B272780E01
Text in illustration 
*1
Rear Seat Cushion Lock Hook
*2
Rear Side of Rear Seat Cushion Frame
  1. Lift up the front edge of the rear seat cushion with cover pad sub-assembly as shown in the illustration and disengage the 2 hooks from the rear seat cushion lock hooks.

    NOTICE:
    Be sure hold the part of the seat cushion directly next to the rear seat cushion lock hooks when lifting it up. Lifting a different part of the cushion can deform the rear seat cushion frame.

  1. Pass the rear seat inner belt through the slit of the rear seat cushion with cover pad sub-assembly, disengage the 2 hooks from the rear side of the rear seat cushion frame, and remove the rear seat cushion with cover pad sub-assembly.



2. REMOVE REAR SEAT CUSHION COVER WITH PAD SUB-ASSEMBLY (for Fold Down Seat Type)


B272780J01
Text in Illustration 
*1
Rear Seat Cushion Lock Hook
*2
Rear Side of Rear Seat Cushion Frame
  1. Lift up the front edge of the rear seat cushion with cover pad sub-assembly as shown in the illustration and disengage the 2 hooks from the rear seat cushion lock hooks.

    NOTICE:
    Be sure hold the part of the seat cushion directly next to the rear seat cushion lock hooks when lifting it up. Lifting a different part of the cushion can deform the rear seat cushion frame.

  1. Pass the rear seat inner belt through the slit of the rear seat cushion with cover pad sub-assembly, disengage the 2 hooks from the rear side of the rear seat cushion frame, and remove the rear seat cushion cover with pad sub-assembly.



3. REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH


    B287811
  1. Disconnect the connector.

  1. Remove the bolt and the rear seat inner with center belt assembly RH.