Home › Vehicle Interior › DOOR LOCK › UNLOCK WARNING SWITCH (for Sedan)

UNLOCK WARNING SWITCH (for Sedan) > INSTALLATION



1. INSTALL UN-LOCK WARNING SWITCH ASSEMBLY


B118054
  1. Engage the 2 claws and install the unlock warning switch.

  1. Connect the connector.



2. INSTALL STEERING COLUMN COVER


    C139094E01
  1. Engage the claw to install the steering column upper cover.



    C139093E01
  1. Engage the 2 claws to install the steering column lower cover.

  1. Install the 3 screws.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }