Home › Brake › BRAKE (REAR) › REAR BRAKE (for Hatchback Drum Type)

REAR BRAKE (for Hatchback Drum Type) > INSTALLATION



1. INSTALL REAR BRAKE DRUM SUB-ASSEMBLY


2. ADJUST REAR DRUM BRAKE SHOE CLEARANCE
  1. Provisionally install the hub nuts.



    C233136E01
  1. Remove the hole plug, and turn the adjuster to expand the shoe until the drum locks.
    Text in Illustration 
    *1
    Automatic Adjust Lever
    V100135
    Expand



    C233134E01
  1. Hold the automatic adjust lever away from the adjuster, and contract the brake shoe by turning the adjust bolt using another screwdriver until the drum can rotate smoothly.
    Text in Illustration 
    *1
    Automatic Adjust Lever
    V100135
    Contract

    Standard:
    12 notches

  1. Install the hole plug.



3. BLEED BRAKE LINE
(Click here)


4. BLEED CLUTCH LINE (for Manual Transaxle)
(Click here)


5. INSTALL REAR WHEEL

Torque:
103 N*m{ 1050 kgf*cm , 76 ft.*lbf }



6. ADJUST PARKING BRAKE LEVER TRAVEL
  1. Remove the rear console box (Click here).



    C233136
  1. Remove the hole plug, and turn the adjuster to expand the shoe until the drum locks.
    Text in Illustration 
    V100135
    Expand



    C233134
  1. Hold the automatic adjust lever away from the adjuster, and contract the brake shoe by turning the adjust bolt using another screwdriver until the drum can rotate smoothly.
    Text in Illustration 
    V100135
    Contract

    Standard:
    12 notches

  1. Check that there is no brake drag against the shoe.



    C234723E02
  1. Turn the lock nut until the parking brake lever travel is corrected to within the specified range.
    Text in Illustration 
    *1
    Lock nut

    Parking brake lever travel at 200 N (20 kgf, 45 lbf):
    8 to 11 clicks

  1. Operate the parking brake lever 3 to 4 times, and check the parking brake lever travel.

  1. Install the rear console box (Click here).



7. INSTALL REAR CONSOLE BOX ASSEMBLY
(Click here)