Home › Vehicle Interior › METER / GAUGE / DISPLAY › LIGHT CONTROL RHEOSTAT (for Sedan)

LIGHT CONTROL RHEOSTAT (for Sedan) > REMOVAL



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE INSTRUMENT PANEL BOX
  1. Open the instrument panel box.



    B176558
  1. Pull the instrument panel box out horizontally with the instrument panel open and disengage the 2 hinges.



    B132335E03
  1. Remove the stopper of the instrument panel box from the cutout of the lower instrument panel and remove the instrument panel box.
    Text in Illustration 
    *a
    Stopper
    *b
    Cutout



3. REMOVE LIGHT CONTROL RHEOSTAT


E116831
  1. Disconnect the connector.

  1. Disengage the 2 claws and remove the light control rheostat.