DOOR CONTROL TRANSMITTER (for Hatchback) > REMOVAL |
| 1. REMOVE TRANSMITTER HOUSING COVER |
for Type A:
![]() |
Using a screwdriver with its tip wrapped in protective tape, pry apart the transmitter housing cover.
| *1 | Protective Tape |
for Type B:
![]() |
Using a screwdriver with its tip wrapped in protective tape, pry apart the transmitter housing cover.
| *1 | Protective Tape |
| *2 | Housing Cover |
| 2. REMOVE DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY |
for Type A:
![]() |
Using a precision screwdriver with its tip wrapped in protective tape, remove the door control transmitter module set.
| *1 | Protective Tape |
for Type B:
![]() |
Remove the door control transmitter module set.
| *1 | Protective Tape |