RELAY (for Sedan) > ON-VEHICLE INSPECTION |
| 1. INSPECT MAIN BODY ECU (DEFOGGER RELAY) |
![]() |
Remove the DEF fuse.
Using an ohmmeter, measure the resistance between the terminals of the DEF fuse.
Install the DEF fuse.
Using an ohmmeter, measure the resistance between terminals 4Q-12 and 4Q-4 of the main body ECU connector.
Turn the ignition switch ON.
Turn the defogger switch ON.
Using a voltmeter, measure the voltage between terminal 4F-2 of the main body ECU connector and body ground.