SEAT BELT WARNING SYSTEM (for Hatchback) > CUSTOMIZE PARAMETERS |
| CUSTOMIZE FUNCTION WITH TECHSTREAM |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Body Electrical / Combination Meter / Utility / Customize / Warning.
Select the setting by referring to the table below.
| Tester Display | Default | Content | Setting |
| Driver Side Seatbelt Warning Buzzer | ON | Function to sound the seat belt warning buzzer | OFF/ON |
| Front Passenger Side Seatbelt Warning Buzzer | ON | Function to sound the seat belt warning buzzer | OFF/ON |