Home › Brake › BRAKE SYSTEM (OTHER) › PROPORTIONING VALVE (for Sedan)

PROPORTIONING VALVE (for Sedan) > REMOVAL



1. DRAIN BRAKE FLUID

NOTICE:
Immediately wash off any brake fluid that comes into contact with any painted surfaces.



2. REMOVE PROPORTIONING VALVE


    C171547
  1. Using a union nut wrench, separate the 5 brake tubes from the proportioning valve.



    C121841
  1. Remove the 2 bolts and remove the proportioning valve bracket.



    C121842
  1. Remove the 2 nuts and remove the proportioning valve from the proportioning valve bracket.