Home › General › SPECIFICATIONS › CLUTCH (for Hatchback)

CLUTCH (for Hatchback) > SERVICE DATA



Clutch Pedal 
Pedal height from floor
-
132.1 to 142.1 mm (5.201 to 5.594 in.)
Pedal free play
-
5.0 to 15.0 mm (0.197 to 0.591 in.)
Push rod play at pedal top
-
1.0 to 5.0 mm (0.039 to 0.197 in.)
Clutch release point from pedal full stroke end position
-
25 mm (0.984 in.) or more
Pedal stroke
(Reference)
-
137 to 147 mm (5.394 to 5.787 in.)
Clutch start switch clearance
-
2.1 to 5.1 mm (0.083 to 0.201 in.)

Clutch Unit 
Clutch disc rivet depth
Minimum
0.3 mm (0.0118 in.)
Clutch disc runout
Maximum
0.8 mm (0.0315 in.)
Clutch cover diaphragm spring wear
Maximum depth
0.5 mm (0.0197 in.)
Maximum width
6.0 mm (0.236 in.)
Flywheel runout
Maximum
0.1 mm (0.00394 in.)
Clutch cover diaphragm spring tip non-alignment
Maximum
0.5 mm (0.0197 in.)

Clutch Pedal Switch 
Clutch start switch assembly
Standard resistance
1 - 2
ON (Pushed in)
Below 1 Ω
OFF (Released)
10 kΩ or higher
No. 2 clutch start switch assembly
Standard resistance
1 - 2
ON (Pushed in)
Below 1 Ω
OFF (Released)
10 kΩ or higher