Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING PANEL (for Hatchback)

AIR CONDITIONING PANEL (for Hatchback) > INSTALLATION



1. CONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY
  1. Engage the 2 claws and connect the air mix damper control cable.



2. CONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY
  1. Engage the 2 claws and connect the defroster damper control cable.



3. INSTALL AIR CONDITIONING PANEL ASSEMBLY
  1. Connect the connector.

  1. Engage the claw and 7 clips and install the air conditioning panel.



4. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL
  1. Engage the 5 clips and install the instrument cluster finish panel.



5. INSTALL INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY
  1. Connect the connector.

  1. Engage the 7 clips and install the instrument cluster finish center panel.



6. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY


    B290425
  1. Engage the 4 guides and 10 clips and install the instrument cluster finish panel garnish.