UPPER INSTRUMENT PANEL (for Hatchback) > DISASSEMBLY |
| 1. REMOVE NO. 1 HEATER TO REGISTER DUCT |
![]() |
Remove the 4 <A> screws, disengage the 4 guides and remove the heater to register duct.
| 2. REMOVE NO. 2 HEATER TO REGISTER DUCT |
![]() |
Remove the 4 <A> screws, disengage the 4 guides and remove the heater to register duct.
| 3. REMOVE NO. 6 HEATER TO REGISTER DUCT ASSEMBLY |
![]() |
Remove the heater to register duct.
| 4. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY |
![]() |
Remove the 3 <A> screws, disengage the 3 guides and remove the instrument panel register.
| 5. REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY |
![]() |
Remove the 2 screws.
Disengage the clamp.
Disengage the 3 hooks A.
Disengage the 3 hooks B to remove the instrument panel passenger airbag assembly as shown in the illustration.
| 6. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
![]() |
Disengage the 4 clips and remove the instrument cluster finish panel.
| 7. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY (for Driver Side) |
![]() |
Disengage the 3 claws and remove the instrument panel register.
| 8. REMOVE INSTRUMENT PANEL BOX |
![]() |
Disengage the 5 claws and remove the instrument panel box.
| 9. REMOVE NO. 1 SIDE DEFROSTER NOZZLE |
![]() |
Disengage the 3 claws and guide and remove the defroster nozzle.
| 10. REMOVE NO. 1 INSTRUMENT PANEL CUSHION |
![]() |
Remove the instrument panel cushion.
| 11. REMOVE NO. 2 INSTRUMENT PANEL CUSHION |
![]() |
Remove the instrument panel cushion.
| 12. REMOVE NO. 3 INSTRUMENT PANEL CUSHION |
![]() |
Remove the 2 instrument panel cushions.
| 13. REMOVE INSTRUMENT PANEL CUSHION (for TMC Made) |
![]() |
Remove the instrument panel cushion.
| 14. REMOVE INSTRUMENT PANEL CUSHION (for TMC Made) |
![]() |
Remove the instrument panel cushion.
| 15. REMOVE INSTRUMENT PANEL CUSHION (for TMMF Made) |
![]() |
Remove the 2 instrument panel cushions.
| 16. REMOVE NO. 5 INSTRUMENT PANEL CUSHION |
![]() |
Remove the instrument panel cushion.