PCV VALVE (for Hatchback) > INSPECTION |
| 1. INSPECT VENTILATION VALVE SUB-ASSEMBLY |
Install a clean hose to the ventilation valve sub-assembly.
Check the ventilation valve sub-assembly operation.
![]() |
Blow air into the cylinder head cover side, and check that air passes through easily.
| *1 | Clean Hose |
![]() | Cylinder Head Cover Side |
![]() | Air |
![]() |
Blow air into the intake air manifold side, and check that air passes through with difficulty.
| *1 | Clean Hose |
![]() | Intake Manifold Side |
![]() | Air |
Remove the clean hose from the ventilation valve sub-assembly.