Home › Engine / Hybrid System › 1NZ-FE EMISSION CONTROL › PCV VALVE (for Hatchback)

PCV VALVE (for Hatchback) > REMOVAL


HINT:
Although the part name refers to the ventilation valve sub-assembly, this procedure is for the PCV valve.



1. REMOVE NO. 2 CYLINDER HEAD COVER


    A116235
  1. Remove the 4 nuts and No. 2 cylinder head cover.



2. REMOVE VENTILATION VALVE SUB-ASSEMBLY


    A181225
  1. Disconnect the ventilation hose from the ventilation valve sub-assembly.



    A183411
  1. Remove the ventilation valve sub-assembly from the cylinder head cover sub-assembly.