Home › General › SPECIFICATIONS › CLUTCH (for Sedan)

CLUTCH (for Sedan) > TORQUE SPECIFICATIONS



Part tightened
N*m
kgf*cm
ft.*lbf
Clutch pedal stopper bolt x Lock nut
16
160
12
Clutch master cylinder push rod clevis lock nut
12
120
8.7
Clutch pedal sub-assembly x Clutch pedal support
37
375
27
Clutch start switch assembly x Clutch pedal support
16
160
12
Clutch pedal support x Body
24
241
17
Clutch master cylinder x Clutch pedal support
9.0
92
80 in.*lbf
Clutch master cylinder to flexible hose tube x Clutch master cylinder
14 (15)
144 (155)
10 (11)
Release cylinder bleeder plug x Clutch release cylinder
8.3
85
73 in.*lbf
Clutch release cylinder x Manual transaxle case
12
120
8.7
Clutch release cylinder to flexible hose tube x Clutch release cylinder
14 (15)
144 (155)
10 (11)
Clutch cover assembly x Flywheel sub-assembly
19
195
14
Release fork support x Manual transaxle
37
375
27
( ): for use without union nut wrench