Part Tightened
| N*m
| kgf*cm
| ft.*lbf
|
Generator rectifier and frame x Generator drive end frame assembly
| 4.5
| 46
| 40 in.*lbf
|
Generator holder with rectifier x Generator rectifier end frame
| 2.0
| 20
| 17 in.*lbf
|
Generator regulator assembly x Generator rectifier end frame
| 2.0
| 20
| 17 in.*lbf
|
Generator brush holder assembly x Generator holder with rectifier
| 2.0
| 20
| 17 in.*lbf
|
Generator rear end cover x Generator rectifier end frame
| 4.4
| 45
| 39 in.*lbf
|
Rectifier plate x Generator rear end cover
| for nut
| 4.4
| 45
| 39 in.*lbf
|
for Bolt
| 3.8
| 39
| 34 in.*lbf
|
Generator terminal insulator x Generator holder with rectifier
| 4.1
| 42
| 36 in.*lbf
|
Generator pulley x Generator rotor assembly
| 133
| 1356
| 98
|
Generator assembly x Cylinder head sub-assembly
| for Nut B
| 11
| 112
| 8
|
Negative battery terminal x Negative battery cable
| 5.4
| 55
| 48 in.*lbf
|