Home › General › SPECIFICATIONS › 1NZ-FE BATTERY / CHARGING (for Hatchback)

1NZ-FE BATTERY / CHARGING (for Hatchback) > TORQUE SPECIFICATIONS



Part Tightened
N*m
kgf*cm
ft.*lbf
Generator rectifier and frame x Generator drive end frame assembly
for nut A
4.5
46
40 in.*lbf
for nut B
5.4
55
48 in.*lbf
Generator holder with rectifier x Generator rectifier end frame
2.0
20
18 in.*lbf
Generator regulator assembly x Generator rectifier end frame
2.0
20
18 in.*lbf
Generator brush holder assembly x Generator holder with rectifier
2.0
20
18 in.*lbf
Generator rear end cover x Generator rectifier end frame
4.4
45
39 in.*lbf
Rectifier plate x Generator rear end cover
4.4
45
39 in.*lbf
Generator terminal insulator x Generator holder with rectifier
3.9
40
35 in.*lbf
Generator pulley x Generator rotor assembly
133
1356
98
Generator assembly x Cylinder head sub-assembly
11
112
8
Negative battery terminal x Negative battery cable
5.4
55
48 in.*lbf