Home › General › SPECIFICATIONS › 1NZ-FE STARTING (for Sedan)

1NZ-FE STARTING (for Sedan) > TORQUE SPECIFICATIONS



Part Tightened
N*m
kgf*cm
ft.*lbf
Starter assembly x Transaxle housing
37
377
27
Starter assembly x Terminal 30
9.8
100
7.2
Negative battery terminal x Negative battery cable
5.4
55
48 in.*lbf
Starter brush holder assembly x Commutator end frame
1.5
15
13 in.*lbf
Starter yoke assembly x Commutator end frame
5.9
60
52 in.*lbf
Magnet starter switch assembly x Starter housing
8.3
85
73 in.*lbf
Terminal C x Lead wire
9.8
100
87 in.*lbf