Home › General › SPECIFICATIONS › DRIVE SHAFT / PROPELLER SHAFT (for Sedan)

DRIVE SHAFT / PROPELLER SHAFT (for Sedan) > TORQUE SPECIFICATIONS



Part Tightened
N*m
kgf*cm
ft.*lbf
Automatic transmission case protector x Automatic transaxle
23
235
17
Front lower suspension arm x Steering knuckle
98
1,000
72
Front stabilizer link assembly x Front shock absorber assembly
74
755
55
Tie rod end sub-assembly x Steering knuckle
49
500
36
Front speed sensor x Steering knuckle
8.5
87
75 in.*lbf
Front speed sensor x Front flexible hose
29
300
22
Front axle hub nut x Front drive shaft
216
2,203
160
Front wheel
103
1,050
76
Battery negative terminal x Battery
5.4
55
48 in.*lbf