Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › LUGGAGE COMPARTMENT DOOR GARNISH (for Sedan)

LUGGAGE COMPARTMENT DOOR GARNISH (for Sedan) > INSTALLATION



1. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY


    B134844
  1. Engage the 3 clips and install the luggage compartment door outside garnish.

  1. Tighten the 2 nuts.



2. INSTALL LUGGAGE COMPARTMENT DOOR LOCK CYLINDER


    B144408
  1. Install the luggage compartment lock cylinder with the 2 nuts.

    Torque:
    4.9 N*m{ 50 kgf*cm , 43 in.*lbf }

  1. Engage the snap and connect the luggage compartment door lock link.

  1. Connect the connector.