SHIFT LEVER (for Hatchback) > ADJUSTMENT |
| 1. REMOVE REAR CONSOLE BOX ASSEMBLY |
| 2. ADJUST SHIFT LEVER POSITION |
Move the shift lever to N.
![]() |
Slide the adjuster case cover in the direction shown by the arrow.
| *1 | Adjuster Case |
| *2 | Cover |
| *3 | Lock Piece |
Using a precision screwdriver, pull up the lock piece.
![]() |
Using your fingers, gently pull the cable rod towards the rear of the vehicle to remove backlash.
| *1 | Adjuster Case |
| *2 | Lock Piece |
| *3 | Cable Rod |
| *4 | Cover |
Push in the lock piece of the adjuster case to lock it.
Slide the adjuster case cover in the direction shown by the arrow.
| 3. INSTALL REAR CONSOLE BOX ASSEMBLY |