Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER (for Hatchback)

CONDENSER (for Hatchback) > REASSEMBLY

for Preparation Click here



1. INSTALL COOLER DRYER


    I104987
  1. Using pliers, install the cooler dryer onto the modulator.



    E101932
  1. Apply sufficient compressor oil to the O-ring and the fitting surface of the cap.



    I104986E05
  1. Using a 14 mm straight hexagon wrench, install the cap onto the modulator.
    Text in Illustration 
    *1
    14 mm Straight Hexagon Wrench
    *2
    Modulator

    Torque:
    2.9 N*m{ 30 kgf*cm , 26 in.*lbf }