Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BLACK OUT TAPE (for Hatchback Rear Door)

BLACK OUT TAPE (for Hatchback Rear Door) > INSTALLATION



1. INSTALL NO. 2 BLACK OUT TAPE
  1. Application precautions .

  1. Clean the attachment surface (using an infrared light) .

  1. Clean the attachment surface (using a tape removal disc) .



  1. Apply new outer front black out tape to the positions shown in the illustration.


    B272534E01

    Standard Measurement:
    Dimension
    Measurement
    a
    2.0 to 4.0 mm (0.079 to 0.157 in.)
    b
    3.0 to 5.0 mm (0.118 to 0.197 in.)



2. INSTALL REAR DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY
(Click here)