BRAKE MASTER CYLINDER (for Hatchback) > REASSEMBLY |
| 1. INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER |
| 2. INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY |
| 3. INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY |
Apply lithium soap base glycol grease to 2 new grommets.
Install the 2 grommets onto the brake master cylinder reservoir sub-assembly.
Install the brake master cylinder reservoir sub-assembly to the master cylinder body.
![]() |
Fix the brake master cylinder in a vise between aluminum plates.
Using a pin punch 5 mm and a hammer, tap in the straight pin.