GENERATOR (for Hatchback) > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE NO. 2 CYLINDER HEAD COVER |
| 4. REMOVE FAN AND GENERATOR V BELT |
![]() |
Loosen bolts A and B.
Release the fan and generator V belt tension and remove the fan and generator V belt.
| 5. REMOVE GENERATOR ASSEMBLY |
![]() |
Remove the terminal cap.
Disconnect the connector and the harness clamp.
Remove the nut and disconnect the wire harness from terminal B.
| *1 | Terminal B |
![]() |
Remove the belt adjusting slider fixing bolt A, nut B and the belt adjusting slider.
![]() |
Remove the bolt A, screw B and the piping clamp.
![]() |
Remove the fixing bolt and the generator assembly.