Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY (for Hatchback 60/40 Split Seat Type RH Side)

REAR SEAT ASSEMBLY (for Hatchback 60/40 Split Seat Type RH Side) > INSTALLATION

for Preparation Click here



1. INSTALL REAR SEATBACK ASSEMBLY RH


    B272783E01
  1. Engage the 2 hooks and temporary install the rear seatback assembly RH.

  1. Install the 2 bolts in the sequence shown in the illustration.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

  1. Pull back the rear seatback assembly RH.



2. INSTALL REAR SEAT CUSHION LOCK HOOK
  1. Engage the 4 claws to install the 2 rear seat cushion lock hooks.



3. INSTALL REAR SEAT CUSHION WITH COVER PAD SUB-ASSEMBLY


    B272781E01
  1. Pass the rear seat inner belt through the slit of the rear seat cushion cover with pad sub-assembly.
    Text in Illustration 
    *1
    Rear Side of Rear Seat Cushion Frame
    *2
    Rear Seat Cushion Lock Hook

  1. Align the rear side of the rear seat cushion frame with the 2 hooks.

  1. Engage the 2 hooks with the rear seat cushion lock hooks to install the rear seat cushion cover with pad sub-assembly.

    NOTICE:
    Check that the rear seat cushion lock hooks and the rear seat cushion frame are securely engaged.



4. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY
  1. Install the package tray trim panel assembly.

  1. Install the 2 package tray trim suspenders.