REAR SEAT ASSEMBLY (for Sedan 60/40 Split Seat Type RH Side) > DISASSEMBLY |
| 1. REMOVE REAR SEAT CUSHION COVER (for Cover Separate Type) |
![]() |
Remove the 39 hog rings and the rear seat cushion cover.
| 2. REMOVE REAR SEAT HEADREST ASSEMBLY |
![]() |
Push the lock button of the rear seat headrest support and remove the rear seat headrest.
| 3. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY |
![]() |
Push the lock button of the rear seat headrest support and remove the rear seat headrest.
| 4. REMOVE REAR SEAT SHOULDER BELT GUIDE |
![]() |
Remove the 2 screws and the rear seat shoulder belt guide.
| 5. REMOVE REAR SEATBACK LOCK RELEASE BUTTON |
![]() |
Remove the rear seatback lock release button.
| 6. REMOVE REAR CENTER SEAT SHOULDER BELT GUIDE |
![]() |
Remove the 2 screws and the rear center seat shoulder belt guide.
| 7. REMOVE REAR SEATBACK LOCK CONTROL BEZEL |
![]() |
Disengage the 2 claws and remove the rear seatback lock control bezel.
| 8. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY |
![]() |
Using a clip remover, remove the 7 clips and open the rear seatback cover.
![]() |
Remove the 2 nuts, the 2 wave washers and the rear seat center armrest.
| 9. REMOVE REAR SEAT CENTER ARMREST HINGE COVER |
![]() |
Disengage the 3 claws and remove the rear seat armrest hinge cover.
| 10. REMOVE REAR SEAT CENTER ARMREST HINGE |
![]() |
Remove the 2 bolts, the 2 spacers and the rear seat armrest hinge.
| 11. REMOVE CUP HOLDER ASSEMBLY |
![]() |
Disengage the 4 claws and remove the cup holder.
| 12. REMOVE REAR SEAT HEADREST SUPPORT |
![]() |
Remove the 9 hog rings.
![]() |
Disengage the 2 claws and remove the rear seat headrest support.
| 13. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY |
![]() |
Remove the rear seatback frame.
| 14. REMOVE REAR SEAT BACK COVER (for Cover Separate Type) |
![]() |
Remove the 15 hog rings and remove the rear seat back cover.
| 15. REMOVE REAR SEATBACK LOCK ASSEMBLY |
![]() |
Remove the 2 bolts and the rear seatback lock.