REAR SEAT ASSEMBLY (for Hatchback 60/40 Split Seat Type RH Side) > DISASSEMBLY |
| 1. REMOVE BENCH TYPE REAR SEAT CUSHION COVER (for TMC Made) |
![]() |
Remove the 44 hog rings and the bench type rear seat cushion cover from the bench type rear seat cushion pad.
| 2. REMOVE BENCH TYPE REAR SEAT CUSHION COVER (for TMMF Made) |
![]() |
Disengage the 30 hooks.
Pass the 3 plastic plates of the bench type rear seat cushion cover through the bench type rear seat cushion pad and remove the bench type rear seat cushion cover.
| 3. REMOVE REAR SEAT HEADREST ASSEMBLY |
Remove the rear seat headrest assembly.
| 4. REMOVE REAR SEATBACK COVER |
![]() |
Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws to remove the rear seatback cover.
| *a | Protective Tape |
| 5. REMOVE REAR SEATBACK LOCK RELEASE BUTTON |
![]() |
Turn the rear seatback lock release button in the direction indicated by arrow to remove it.
| 6. REMOVE REAR SEATBACK STOP BUTTON GROMMET |
![]() |
| 7. REMOVE REAR SEAT HEADREST SUPPORT (for TMC Made) |
![]() |
Using a clip remover, remove the 7 clips.
![]() |
Disengage the 5 hooks.
![]() |
Disengage the 4 claws to remove the 2 rear seat headrest supports.
| 8. REMOVE REAR SEAT HEADREST SUPPORT (for TMMF Made) |
![]() |
Using a clip remover, remove the 2 clips.
Unfasten the 7 hook and loop fasteners.
![]() |
Disengage the 5 hooks.
![]() |
Disengage the 4 claws to remove the 2 rear seat headrest supports.
| 9. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY RH |
![]() |
Remove the rear seatback frame sub-assembly RH.
| 10. REMOVE REAR SEATBACK LOCK ASSEMBLY RH |
![]() |
Remove the 2 bolts and the rear seatback lock assembly RH from the rear seatback frame sub-assembly RH.
| 11. REMOVE SEPARATE TYPE REAR SEATBACK COVER (for TMC Made) |
![]() |
Remove the 6 hog rings and the separate type rear seatback cover from the separate type rear seatback pad.
| 12. REMOVE SEPARATE TYPE REAR SEATBACK COVER (for TMMF Made) |
![]() |
Disengage the 7 hooks to remove the separate type rear seatback cover from the separate type rear seatback pad.