Home › Vehicle Exterior › HORN › LOW PITCHED HORN (for Sedan)

LOW PITCHED HORN (for Sedan) > INSTALLATION



1. INSTALL LOW PITCHED HORN ASSEMBLY


    B134902E01
  1. Install the low pitched horn with the bolt.

    Torque:
    19.5 N*m{ 200 kgf*cm , 14 ft.*lbf }

    NOTICE:
    Do not place the low pitched horn over the stopper of the body.

  1. Connect the low pitched horn connector.



2. INSTALL FRONT BUMPER COVER
(Click here)