Home › Vehicle Interior › SEAT BELT › REAR CENTER SEAT INNER BELT ASSEMBLY (for Sedan)

REAR CENTER SEAT INNER BELT ASSEMBLY (for Sedan) > INSTALLATION



1. INSTALL REAR CENTER SEAT INNER BELT ASSEMBLY


  1. for RH Side:



      B134908E03
    1. Install the rear center seat inner belt with the bolt.
      Text in Illustration 
      *a
      Arrow Mark
      *b
      Locating Mark

      Torque:
      42 N*m{ 428 kgf*cm , 31 ft.*lbf }

      NOTICE:
      1. Install the anchor plate with the arrow mark facing forward.
      2. Do not place the anchor plate over the locating mark area of the floor panel.



    B134905E03
  1. for LH Side:
    Text in Illustration 
    *a
    Arrow Mark
    *b
    Locating Mark

    1. Install the rear center seat inner belt with the bolt.

      Torque:
      42 N*m{ 428 kgf*cm , 31 ft.*lbf }

      NOTICE:
      1. Install the anchor plate with the arrow mark facing forward.
      2. Do not place the anchor plate over the locating mark area of the floor panel.



2. INSTALL REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY


    B272781E01
  1. Pass the rear seat inner belt through the slit of the rear seat cushion cover with pad sub-assembly.
    Text in Illustration 
    *1
    Rear Side of Rear Seat Cushion Frame
    *2
    Rear Seat Cushion Lock Hook

  1. Align the rear side of the rear seat cushion frame with the 2 hooks.

  1. Engage the 2 hooks with the rear seat cushion lock hooks to install the rear seat cushion cover with pad sub-assembly.

    NOTICE:
    Check that the rear seat cushion lock hooks and the rear seat cushion frame are securely engaged.