Home › Vehicle Interior › SEAT BELT › REAR CENTER SEAT INNER BELT ASSEMBLY (for Sedan)

REAR CENTER SEAT INNER BELT ASSEMBLY (for Sedan) > REMOVAL



1. REMOVE REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY


B272780E01
Text in illustration 
*1
Rear Seat Cushion Lock Hook
*2
Rear Side of Rear Seat Cushion Frame
  1. Lift up the front edge of the rear seat cushion with cover pad sub-assembly as shown in the illustration and disengage the 2 hooks from the rear seat cushion lock hooks.

    NOTICE:
    Be sure hold the part of the seat cushion directly next to the rear seat cushion lock hooks when lifting it up. Lifting a different part of the cushion can deform the rear seat cushion frame.

  1. Pass the rear seat inner belt through the slit of the rear seat cushion with cover pad sub-assembly, disengage the 2 hooks from the rear side of the rear seat cushion frame, and remove the rear seat cushion with cover pad sub-assembly.



2. REMOVE REAR CENTER SEAT INNER BELT ASSEMBLY


    B134907
  1. for RH Side:

    1. Remove the bolt and the rear center seat inner belt.



    B134904
  1. for LH Side:

    1. Remove the bolt and the rear center seat inner belt.