DOOR CONTROL SWITCH (for Sedan) > INSTALLATION |
| 1. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for Driver Side) |
Install the power window regulator master switch assembly with the 3 screws.
| 2. INSTALL DOOR CONTROL SWITCH (for Front Passenger Side) |
![]() |
Engage the 2 claws and install the door control switch.
| 3. INSTALL FRONT ARMREST BASE UPPER PANEL |
for Driver Side:
Connect the connector.
![]() |
Engage the 7 claws and 2 clips, and install the front armrest base upper panel.
Install the screw.
for Front Passenger Side:
Connect the 2 connectors.
![]() |
Engage the 7 claws and 2 clips, and install the front armrest base upper panel.
Install the screw.