Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL SWITCH (for Sedan)

DOOR CONTROL SWITCH (for Sedan) > INSTALLATION



1. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (w/ Power Window)


B136183
  1. Install the power window regulator master switch assembly with the 3 screws.



2. INSTALL DOOR CONTROL SWITCH


B141927
  1. for Front passenger side with power window:
    Engage the 2 claws and install the door control switch.



    B141928
  1. w/o Power window:
    Engage the 2 claws and install the door control switch.



3. INSTALL FRONT ARMREST BASE UPPER PANEL


B136158
  1. for Driver side with power window:

    1. Connect the connector.

    2. Engage the 7 claws and 2 clips and install the front armrest base upper panel.

    3. Install the screw.



    B141925
  1. for Front passenger side with power window:

    1. Connect the connector.

    2. Engage the 7 claws and 2 clips and install the front armrest base upper panel.

    3. Install the screw.



    B141926
  1. w/o Power window:

    1. Engage the 5 clips and 2 clips and install the front armrest base upper panel.

    2. Install the screw.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }