Home › Vehicle Exterior › WINDOW / GLASS › FRONT PASSENGER SIDE POWER WINDOW SWITCH (for Sedan)

FRONT PASSENGER SIDE POWER WINDOW SWITCH (for Sedan) > INSTALLATION



1. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY


B141906
  1. Engage the 2 claws and install the power window regulator switch.



2. INSTALL FRONT ARMREST BASE UPPER PANEL


  1. for Driver Side:

    1. Connect the connector.



    2. B136158
    3. Engage the 7 claws and 2 clips, and install the front armrest base upper panel.

    4. Install the screw.



  1. for Front Passenger Side:

    1. Connect the 2 connectors.



    2. B141925
    3. Engage the 7 claws and 2 clips, and install the front armrest base upper panel.

    4. Install the screw.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }