Home › Vehicle Exterior › WINDOW / GLASS › REAR POWER WINDOW SWITCH (for Sedan)

REAR POWER WINDOW SWITCH (for Sedan) > INSTALLATION



1. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY


B169342
  1. Engage the 2 claws and install the power window regulator switch.



2. INSTALL REAR DOOR ARMREST BASE UPPER PANEL
  1. Connect the connector.



    B208702
  1. Engage the 7 claws and 2 clips, and install the rear door armrest base upper panel.

  1. Install the screw.