BACK DOOR (for Hatchback) > INSPECTION |
| 1. INSPECT DOOR UNLOCK SWITCH SUB-ASSEMBLY (w/ Power Door Lock) |
![]() |
Check the resistance.
| *a | Component without harness connected (Door Unlock Switch Sub-assembly) |
| *b | UNLOCK |
| *c | LOCK |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 3 (L) - 4 (E) | LOCK | 10 kΩ or higher |
| OFF | Below 1 Ω | |
| 2 (UL) - 4 (E) | UNLOCK | 10 kΩ or higher |
| OFF | Below 1 Ω |