REAR COMBINATION LIGHT ASSEMBLY (for Hatchback) > REASSEMBLY |
| 1. INSTALL REAR COMBINATION LIGHT PROTECTOR |
![]() |
Install the rear combination light protector with the 2 screws.
| 2. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY |
![]() |
Engage the clamp to install the rear combination light socket and wire sub-assembly.
| 3. INSTALL BACK UP LIGHT BULB |
Install the back up light bulb into the rear combination light socket and wire sub-assembly.
![]() |
Turn the rear combination light socket and wire sub-assembly with the bulb in the direction indicated by the arrow in the illustration to install them.
| 4. INSTALL REAR TURN SIGNAL LIGHT BULB |
Install the rear turn signal light bulb into the rear combination light socket and wire sub-assembly.
![]() |
Turn the rear combination light socket and wire sub-assembly with the bulb in the direction indicated by the arrow in the illustration to install them.
| 5. INSTALL TAIL AND STOP LIGHT BULB |
Install the tail and stop light bulb into the rear combination light socket and wire sub-assembly.
![]() |
Turn the rear combination light socket and wire sub-assembly with the bulb in the direction indicated by the arrow in the illustration to install them.
| 6. INSTALL REAR COMBINATION LIGHT BODY PACKING |
![]() |
Install a new rear combination light body packing.