Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER (for Hatchback without Sport Package)

REAR BUMPER (for Hatchback without Sport Package) > DISASSEMBLY



1. REMOVE REAR BUMPER PLATE LH


    B289850
  1. Remove the screw.

  1. Disengage the 2 claws and remove the rear bumper plate.



2. REMOVE REAR BUMPER PLATE RH

HINT:
Use the same procedure as for the LH side.



3. REMOVE REAR BUMPER SIDE SEAL LH


    B272396
  1. Remove the 2 clips and the rear bumper side seal.



4. REMOVE REAR BUMPER SIDE SEAL RH

HINT:
Use the same procedure as for the LH side.



5. REMOVE REAR BUMPER SIDE RETAINER LH


    B272394
  1. Remove the screw.

  1. Disengage the 2 claws and guide and remove the rear bumper side retainer.



6. REMOVE REAR BUMPER SIDE RETAINER RH

HINT:
Use the same procedure as for the LH side.



7. REMOVE REAR BUMPER SIDE SUPPORT LH


    B272395
  1. Remove the screw.

  1. Disengage the 2 claws and rear bumper side support.



8. REMOVE REAR BUMPER SIDE SUPPORT RH

HINT:
Use the same procedure as for the LH side.



9. REMOVE REAR NO. 1 BUMPER REINFORCEMENT


    B288643
  1. Remove the 4 nuts and the rear bumper reinforcement.



10. REMOVE REAR BUMPER ARM LH


    B288644
  1. Remove the 3 bolts and the rear bumper arm.



11. REMOVE REAR BUMPER ARM RH

HINT:
Use the same procedure as for the LH side.



12. REMOVE REAR NO. 2 BUMPER REINFORCEMENT


    B283041
  1. Disengage the 2 guides and remove the rear bumper reinforcement.