REAR BUMPER (for Hatchback with Sport Package) > REASSEMBLY |
| 1. INSTALL REAR NO. 2 BUMPER REINFORCEMENT |
![]() |
Engage the 2 guides and install the rear bumper reinforcement.
| 2. INSTALL REAR BUMPER ARM LH |
![]() |
Install the rear bumper arm with the 3 bolts.
| 3. INSTALL REAR BUMPER ARM RH |
| 4. INSTALL REAR NO. 1 BUMPER REINFORCEMENT |
![]() |
Install the rear bumper reinforcement with the 4 nuts.
| 5. INSTALL REAR BUMPER SIDE SUPPORT LH |
![]() |
Engage the 2 claws and install the rear bumper side support.
Tighten the screw.
| 6. INSTALL REAR BUMPER SIDE SUPPORT RH |
| 7. INSTALL REAR BUMPER SIDE RETAINER LH |
![]() |
Engage the guide and, 2 claws and install the rear bumper side retainer.
Tighten the screw.
| 8. INSTALL REAR BUMPER SIDE RETAINER RH |
| 9. INSTALL REAR BUMPER SIDE SEAL LH |
![]() |
Install the rear bumper side seal with the 2 clips.
| 10. INSTALL REAR BUMPER SIDE SEAL RH |
| 11. INSTALL REAR BUMPER GUARD |
![]() |
Engage the 8 claws and install the rear bumper guard.
Install the 2 clips.
![]() |
Engage the claw and install the outside moulding retainer.
| 12. INSTALL REAR BUMPER PLATE LH |
![]() |
Engage the 2 claws and install the rear bumper plate.
Tighten the 2 nuts.
| 13. INSTALL REAR BUMPER PLATE RH |