BACK DOOR OUTSIDE GARNISH (for Hatchback with Power Door Lock) > REMOVAL |
| 1. REMOVE BACK DOOR TRIM BOARD |
![]() |
Disengage the 11 clips and remove the back door trim board.
| 2. REMOVE REAR WIPER MOTOR ASSEMBLY (w/ Rear Wiper) |
| 3. REMOVE BACK DOOR LOCK CYLINDER ASSEMBLY (w/ Lock Cylinder) |
![]() |
Disconnect the connector.
Remove the 2 nuts and the back door lock cylinder assembly.
![]() |
Disengage the 2 claws and remove the door unlock switch.
| 4. REMOVE NO. 2 BACK DOOR GARNISH RETAINER (w/ Cover) |
![]() |
Remove the 2 nuts and the back door garnish No. 2 retainer.
| 5. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY |
Disconnect the connectors.
![]() |
Remove the 3 nuts.
![]() |
Disengage the 2 clips and remove the back door outside garnish.
| 6. REMOVE BACK DOOR OPENER SWITCH ASSEMBLY |
![]() |
Remove the back door opener switch.