Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BACK DOOR OUTSIDE GARNISH (for Hatchback without Power Door Lock)

BACK DOOR OUTSIDE GARNISH (for Hatchback without Power Door Lock) > REMOVAL



1. REMOVE BACK DOOR TRIM BOARD


    B271631
  1. Disengage the 11 clips and remove the back door trim board.



2. REMOVE REAR WIPER MOTOR ASSEMBLY (w/ Rear Wiper)
(Click here)


3. REMOVE BACK DOOR LOCK CONTROL ASSEMBLY


    B288660
  1. Disconnect the back door outside handle cable.



    B288661
  1. Remove the 2 nuts and the back door lock control.



4. REMOVE BACK DOOR LOCK CYLINDER ASSEMBLY


    B288657
  1. Disconnect the back door lock control rod.



    B288659
  1. Remove the 2 nuts and the back door lock cylinder.



5. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY


    B288656
  1. Remove the nut.



    B283015
  1. Disengage the 2 clips and remove the back door outside garnish.



6. REMOVE BACK DOOR OUTSIDE HANDLE SUB-ASSEMBLY


    B288662
  1. Remove the back door outside handle.